1. Application can’t be opened
Open terminal , enter command xattr -cr, press Space ,
Drag and drop application , Enter.
It will be open as usual now
Sometimes CloudFlare temporary blocked some networks for fraudulent activities, try to use VPN in this case
Check Intenet connection , use another internet
2. Your device supported only by NO SIGNAL
Connect to wifi and go to the activation page with login/ password❗️only after - Connect to the SMD and check again . If the same message appears - check with other soft like a checkm8 / iremove . If there is No signal still - this iPhone is not supported.
Check Carrier lock - if this device locked to specific operator you cant bypass properly
3. Failed to activate
Typically After previous bypass.
Restore device from DFU
Jailbreak 0.12.4 if necessary
Connect wifi, go to the activation page with Login/Password on the device and try again.
Turn OFF all applications on your Mac. Reboot mac , change cable.
❗ SMD Ramdisk method DONT work with Type-C cables or newest M1/M2 Macbooks. Its realy rare case to make it working good. ❗
4. Can’t add to the database
You can’t add SN to the data base until the device has been verified by SMD. To prevent user errors and minimize refund requests. Connect first to the SMD to get message "Device Supported"
5. CMD error / wrong serial number
Check that serial number match to IMEI. If serial changed but IMEI still the same - you cant bypass device. Restore original serial and restore device to start check process again